DIY Analog Multimeter Soldering Practice Kit with Assembly Manual

Description

The AMK-200 analog multitester is a compact, portable VOM (Volt-OHM-Milliamp) meter in kit form. An assembly manual is included (English language). It features 20K ohm/volt input resistance on the DC voltage scales to minimize circuit loading and improve accuracy. The 50 micro-amp meter movement is diode protected and allows a 0.1 volt full-scale range for low voltage level measurements. The AMK-200 will measure AC and DC voltage and current, resistance, and audion signal dBm. In addition, the AMK-200 can measure transistor gain (hfe) and check diode continuity.

• Build your own quality, high performance analog meter with this soldering practice kit
• Once assembled, it measures AC and DC voltage and current, resistance, audion signal dBm, transistor gain (hfe), and checks diode continuity
• Measures 5.82″ x 3.94″ x 1.41″
• 9V and 2x AA batteries are included
• NOTE: This kit requires assembly with a soldering iron. Soldering iron and solder are not included.

Specifications:

• DC Volts: 0 to 2.5V, 10V, 50V, 250V, 1,000V.
• AC Volts: 0 to 10V, 50V, 250V, 1,000V.
• DC Current: 0 to 5mA, 50mA, 500mA, 10A.
• Resistance: X1, x10, X1K.
• Sensitivity: 20,000 ohm/V DC and 8,000 ohm/V AC.
• DC Voltage Range: 0.1/0.5/2.5/10/50/250/1000V
• AC Voltage Range: 10/50/250/1000V
• DC Current Range: 50/2.5m/25m/0.25A
• Resistance Range: Rx1x10x1kx10k
• Transistor Test Range: 0-1000
• hFE Range: 0-1000V
• Decible Range: 10-22dB
• DCV Sensitivity Range: 20k/V
• ACV Sensitivity Range: 9k/V
• Size: 148x100x36mm
• Weight: 280g

9V and 2x AA batteries are included.